Custom NTC Temperature
Sensor Manufacturer
Fully customizable NTC thermistor sensors -- resistance value, B value, probe type, cable material, connector, and harness structure -- engineered to match your exact application in BMS, battery packs, ESS, EV, busbar, and industrial equipment.
- Custom-to-drawing production -- supply your drawing, sample, or specification; we handle the rest
- AEC-Q200 reliability tested -- automotive-grade quality backed by third-party CNAS lab reports
- 2,000,000+ units daily capacity -- 36 automated production lines supporting small-batch trials and mass production
Custom Configuration Options
Specify Every Parameter to Match Your Application
We support full-parameter customization for NTC thermistor sensors. From resistance value and B value to probe type, cable, connector, and harness design -- every detail can be tailored to your project drawing or specification.
Resistance Value
- 10K Ω (most common)
- 50K Ω
- 100K Ω
- Custom value available
B Value
- B3435 K
- B3950 K
- B3977 K
- Custom B value available
Resistance Accuracy
- ±1% (high precision)
- ±3% (standard)
- ±5% (cost-optimized)
- Per project requirement
Probe Type
- Epoxy coated
- Metal shell (stainless / aluminum)
- Ring terminal (OT type, M3-M6)
- Surface mount / flat type
- Bolt-on type
Cable Material & Length
- PVC (standard, cost-effective)
- Silicone (flexible, high-temp)
- PTFE / Teflon (chemical resistant)
- XLPE (radiation cross-linked)
- Cable length: fully customizable
Connector & Harness
- JST, Molex, TE / AMP connectors
- Equivalent / custom connector types
- Single-point NTC sensor harness
- Multi-point NTC sensor harness
- Installation: adhesive, screw, embedded
Application Scenarios
Where Our Custom NTC Sensors Are Used
Designed for demanding thermal management tasks across EV, energy storage, and industrial systems.
BMS Temperature Sensing
NTC sensors provide accurate cell-level temperature data for Battery Management Systems, enabling real-time over-temperature protection and charge/discharge control.
Lithium Battery Pack Monitoring
Multi-point NTC harness assemblies monitor temperature distribution across battery modules, supporting thermal runaway prevention in lithium-ion packs.
Energy Storage System (ESS)
High-voltage insulated NTC sensors with pure nickel strips monitor temperature in rack-mounted ESS battery modules and liquid cooling systems.
EV Battery Temperature Sensing
AEC-Q200 qualified NTC sensors deliver reliable temperature signals for EV battery packs, meeting the stringent reliability requirements of automotive-grade applications.
Busbar Surface Temperature Detection
Flat-type and ring terminal NTC sensors attach directly to busbar surfaces, detecting abnormal heat buildup in high-current power distribution systems.
Power Electronics & Inverters
NTC sensors monitor IGBT modules, capacitors, and heat sinks in inverters and converters, providing thermal feedback for protection and efficiency optimization.
Motor & Charger Temperature Sensing
Embedded NTC sensors in motor windings and on-board chargers detect winding temperature rise, enabling thermal protection and preventing overheating damage.
Industrial Equipment Protection
Custom NTC sensors integrated into industrial machinery provide continuous temperature monitoring and over-temperature shutdown protection for critical process equipment.
Technical Specifications
Standard Parameter Reference Table
The following table outlines typical parameter options for our custom NTC temperature sensors. All parameters marked as "customizable" can be adjusted to meet your specific project requirements.
| Parameter | Options / Specifications |
|---|---|
| Sensor Type | NTC thermistor temperature sensor |
| Resistance Value | 10K, 50K, 100K Ω or customized |
| B Value | B3435, B3950, B3977 K or customized |
| Resistance Tolerance | ±1%, ±3%, ±5% or according to project requirement |
| Operating Temperature | Depending on probe type, cable material, and application |
| Probe Type | Epoxy coated, metal shell, ring terminal, surface mount, flat type, bolt-on type |
| Cable Material | PVC, silicone, PTFE/Teflon, XLPE or customized |
| Cable Length | Customized |
| Connector | JST, Molex, TE, AMP or equivalent -- customizable |
| Mounting Method | Adhesive, screw mount, ring terminal, embedded, surface contact |
| Harness Type | Single-point or multi-point NTC sensor harness |
| Application | BMS, battery pack, ESS, EV, busbar, industrial equipment |
| Customization | Available -- according to drawing, sample, or specification |
* Parameters are for reference only. Final specifications are confirmed during the engineering review process based on your application requirements.
Product Types
NTC Sensor Configurations We Manufacture
Each product type is available with custom resistance, B value, cable, and connector options.
Epoxy NTC Temperature Sensor
Epoxy-coated NTC bead encapsulated for moisture resistance. Ideal for embedded mounting in battery modules, PCB assemblies, and general temperature sensing where a compact, low-cost probe is required.
Metal Shell NTC Temperature Sensor
Stainless steel or aluminum shell enclosure provides mechanical protection and improved thermal contact. Suitable for surface mounting on heat sinks, motor housings, and industrial equipment.
Ring Terminal NTC Temperature Sensor
OT-type ring terminal (M3-M6) enables direct bolt-on installation to busbars, terminal blocks, and battery terminals. Provides reliable surface contact for accurate temperature detection in high-current paths.
Surface Mount NTC Temperature Sensor
Flat-body design with adhesive or clip mounting for direct surface contact on battery cell surfaces, liquid cooling plates, and flat heat-generating components requiring minimal thermal resistance.
Battery Pack & BMS NTC Sensor
Engineered for integration into lithium battery packs and BMS signal acquisition circuits. Available with JST/Molex connectors and customized cable routing to match your module layout and PCB pin assignment.
Multi-Point NTC Sensor Harness
Custom wire harness integrating multiple NTC sensors at defined positions along a single cable assembly. Designed for battery module temperature mapping, ESS rack monitoring, and distributed thermal management systems.
Busbar NTC Temperature Sensor
Specifically designed for busbar surface temperature detection. Features high-voltage insulation and secure mechanical attachment options, suitable for ESS cabinet busbars and power distribution units.
NTC Thermistor Cable Assembly
Complete sensor-to-connector cable assembly combining an NTC thermistor probe with specified cable type, length, and termination. Ready for direct installation into your system without additional wiring work.
ESS High-Voltage NTC Sensor
Dedicated energy storage sensor with pure nickel strip and reinforced insulation, designed for high-voltage environments in commercial and utility-scale energy storage systems and inverter thermal management.
Customization Process
From Your Specification to Delivered Product
We can work from your drawing, sample, or written specification. Our engineering team reviews requirements and proposes the optimal solution before any production commitment.
Send Your Application Requirements
Describe your application, environment, and installation method. Share your drawing, sample, or specification document -- we accept any format.
Confirm Resistance, B Value & Accuracy
Our engineering team reviews your thermal requirements and recommends the appropriate resistance value, B constant, and tolerance grade for your application.
Select Probe, Cable & Connector
Choose probe type, cable material, cable length, and connector based on your installation method and environment. We provide options and recommendations.
Provide Drawing, Sample or Dimensions
Supply a 2D/3D drawing, physical sample, or installation dimensions. We can reverse-engineer from a sample or work directly from your CAD file.
Prototype & Sample Confirmation
We produce prototype samples for your evaluation and testing. Adjustments are made based on your feedback before mass production is approved.
Mass Production & Delivery
Upon sample approval, we schedule production on our automated lines. Batch inspection is performed before shipment to ensure consistent quality.
Quality & Testing
Systematic Inspection at Every Stage
Our quality control process covers incoming materials, in-process checks, and outgoing inspection. Testing can be arranged according to project requirements, including third-party CNAS laboratory verification.
Resistance Value Testing
Each sensor is measured at reference temperature to verify resistance value against specification tolerance using calibrated precision bridges.
B Value Verification
B constant is verified by measuring resistance at two reference temperatures, confirming the thermistor characteristic curve matches specification.
Insulation & Dielectric Test
Insulation resistance and dielectric strength tests are performed on cable assemblies, particularly for high-voltage ESS and automotive applications.
Cable & Connector Inspection
Cable continuity, connector engagement force, and crimping quality are checked to ensure reliable electrical connection and mechanical integrity.
Pull Force Test
Tensile pull force testing on cable-to-probe joints and connector terminations verifies mechanical strength meets the requirements for the intended installation environment.
Appearance Inspection
Visual and dimensional inspection checks probe surface, cable jacket, connector housing, and label marking against the approved sample and product specification.
Sample Confirmation Before Production
Prototype samples are submitted for customer approval and internal engineering sign-off before mass production is released, preventing costly rework.
Batch Inspection Before Shipment
Outgoing quality control sampling is conducted on each production batch. Test reports and inspection records are available upon request for traceability.
Additional reliability testing -- including thermal shock, constant temperature & humidity, X-ray inspection, and voltage withstand -- can be arranged according to project requirements. Third-party CNAS laboratory testing for AEC-Q200 compliance is available on request.
Frequently Asked Questions
Common Questions About Custom NTC Sensors
Answers to the most common questions from engineers, procurement managers, and product teams evaluating custom NTC temperature sensor suppliers.
Can I customize the NTC resistance value and B value?
Can I specify a custom cable length and connector type?
Can you manufacture according to my drawing or sample?
Do you supply NTC sensors for battery pack and BMS applications?
Can you produce multi-point NTC sensor harnesses?
What resistance values are most commonly available?
What information do I need to provide to get a quote?
Can I get samples before placing a production order?
Do you support small-batch trial orders and large-volume production?
How do I select the right NTC temperature sensor for my application?
Send Your Specification.
We'll Handle the Rest.
Share your drawing, sample, or project requirements -- our engineering team will review and respond with a technical proposal and quotation within 24 hours.
- 24-hour quotation response for standard configurations
- Custom-to-drawing production from sample or specification
- Small-batch trials to full-volume production supported
- AEC-Q200 test reports available for automotive projects